MODEL "190RBW"
Medium Duty Roller Bed
Wire Mesh Belt Conveyor
Medium Duty Roller Bed
Wire Mesh Belt Conveyor
• Drying operations
• Wet or oily products
• Hot or cold parts from
ovens or freezers
• One direction operation
• Wet or oily products
• Hot or cold parts from
ovens or freezers
• One direction operation
STANDARD SPECIFICATIONS
Applications / Features:
Belt - 12", 18", 24" and 36" wide, 1/2"x1" flat wire belt.
Bed - 1.9" diameter rollers mounted on 6" centers in 6-1/2" deep x 12 gauge powder painted formed channel, bolted together with splice plates and supports.
Drive Sprockets - 6" pitch diameter cast iron sprockets machined for 1-3/16" diameter shaft.
Tail Pulley - 4" diameter with 4" pitch diameter cast iron sprockets on each end of pulley, 1-3/16" diameter shaft.
Snub Roller - Adjustable 2" diameter roller located directly behind drive sprockets and tail sprockets.
Return Idlers - 1.9" diameter, adjustable, on 10'0" centers.
Take-Up - 6" long screws located at tail pulley to tighten belt.
Bearings - Sealed and prelubricated with heavy duty housing.
Floor Supports - Adjustable 31" to 45" from floor to top of belt. One support supplied at each end of conveyor and at each bed joint.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - Maximum load per linear foot of conveyor - 75 pounds. Not to exceed Load Capacity Chart.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Bed - 1.9" diameter rollers mounted on 6" centers in 6-1/2" deep x 12 gauge powder painted formed channel, bolted together with splice plates and supports.
Drive Sprockets - 6" pitch diameter cast iron sprockets machined for 1-3/16" diameter shaft.
Tail Pulley - 4" diameter with 4" pitch diameter cast iron sprockets on each end of pulley, 1-3/16" diameter shaft.
Snub Roller - Adjustable 2" diameter roller located directly behind drive sprockets and tail sprockets.
Return Idlers - 1.9" diameter, adjustable, on 10'0" centers.
Take-Up - 6" long screws located at tail pulley to tighten belt.
Bearings - Sealed and prelubricated with heavy duty housing.
Floor Supports - Adjustable 31" to 45" from floor to top of belt. One support supplied at each end of conveyor and at each bed joint.
Speed Reducer - C-Face mounted heavy duty worm gear reducer.
Motor - 1/2 HP 230/460-3-60 TE motor.
Belt Speed - 60 FPM constant.
Capacity - Maximum load per linear foot of conveyor - 75 pounds. Not to exceed Load Capacity Chart.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).
Horizontal Powered
STANDARD SPECIFICATIONS
Engineering Data
Inclined Powered
(Optional colors available at extra cost.)
Optional ACSI Colors