MODELS “254SR / 254SRC”

Frames – 3-1⁄2″ deep x 1-1⁄2″ x 10 gauge powder painted formed steel with bolted cross members.
Rollers set 1⁄4″ high.
Rollers – 2-1⁄2″ diameter x 14 gauge steel tubing with swaged ends to provide firm bearing seat.
2-1⁄2″ to 1-11⁄16″ tapered rollers available for curves.
Bearings– Labyrinth sealed and lightly oiled.
Axles– 7⁄16″ hex shaft, spring-loaded.
Couplings – Butt type, for bolting sections together.
Widths – From 13″ between frames (B/F) and wider in two inch increments up to 27″ between frames.
Also 31″, 33″, 37″, 39″, 45″, 51″ and 55″ between frames.
Lengths – 10′ and 5′ straight sections.
Curve Degree – 45° and 90° with 2’8-1⁄2″ inside radius for widths up to 27″ between frames.
4’0″ inside radius for 31″, 33″, 37″, and 39″ between frames.
Capacity– 350 pounds per roller on narrow sizes,with 1,350 pounds maximum live load on 10′ sections;
3,300 pounds maximum live load on 5′ section.
(For Weight Specifications and Engineering Line Drawings please see catalog pages, above).

ACSI Paint Colors

(Optional colors available at extra cost)