Lead Times

Gravity Skatewheel Conveyor – Straight

– 12″ OAW-10 WPF
– 18″ OAW-16 WPF
– 24″ OAW-20 WPF
– 10′ and 5′ Sections – galvanized steel wheels and powder painted steel frames

Gravity Skatewheel Conveyor – Curves

– 12″, 18″ or 24″ OAW
– 90 Degrees with or without guard
– Galvanized steel wheels and powder painted steel frames

Model “138SR” – Straight

– 12″, 18″ or 24″ OAW
– 10′ and 5′ Sections
– 1-1/2″, 3″, 4-1/2″, 6″, 9″ or 12″ Rollers Centers
– Galvanized 1 3/8″ diameter rollers
– Powder painted steel frames

Model “138SRC” – 90° Curve

– 12″ Wide, 3′ Outside radius
– 18″ Wide, 3′-6″ Outside radius
– 24″ Wide, 4′ Outside Radius
– 1-1/2″ or 3″ Roller Centers
– Galvanized 1-3/8″ diameter rollers
– Powder painted steel frames

Model “190SR”/”190HSR” – Straight

– 15″, 19″, 21″, 25″, 27″, 31″, 33″ or 39″ width between frames
– 2-1/4″, 3″, 4-1/2″, 6″, 9″ or 12″ Roller centers
– 10′ and 5′ Sections
– Galvanized and unplated 1.9″ diameter rollers
– Powder painted steel frames

Model “190SRC” – Galvanized Straight Roller Curve

– 15″, 19″, 21″, 25″ or 27″ width between frames,
has 2′ 8-1/2″ inside radius
– 31″, 33″ or 39″ width between frames, has 4′ inside radius
– Galvanized straight rollers
– 90 Degree curve
– Powder painted steel frames

Model “190HSRC” – Unplated Straight Roller Curve

– 13″, 15″, 17″, 19″, 21″, 23″, 25″ or 27″ width between frames,
has 2′ 8-1/2″ inside radius
– 31″, 33″, 37″ or 39″ width between frames, has 4′ inside radius
– Unplated straight rollers
– 90 Degree curve
– Powder painted steel frames

Model “190SRCT” – Galvanized Tapered Roller Curve

– 15″, 19″, 21″, 25″ or 27″ width between frames,
has 2′ 8-1/2″ inside radius
– 31″, 33″ or 39″ width between frames, has 4′ inside radius
– Galvanized tapered rollers
– 90 Degree curve
– Powder painted steel frames

Model “190HSRCT” – Unplated Tapered Roller Curve

– 15″, 19″, 21″, 25″ or 27″ width between frames,
has 2′ 8-1/2″ inside radius
– 31″, 33″ or 39″ width between frames, has 4′ inside radius
– Unplated tapered rollers
– 90 Degree curve
– Powder painted steel frames

Model “LPB” & “TSB”

– 8″, 12″, 18″, 20″, 24″ or 30″ belt width, 120 PVC Belt
– CN40 FS x FS for conveyor lengths 10′ 0″ and less
– 60 FPM constant speed
– MD-6 Floor Supports
– Up to 1 HP 230/460/3/60 TE Motor
– Model “TSB” has 2-1/2″ high solid steel guard rails

Model “HPB”

– 14″, 18″, 24″ or 30″ belt width, 120 PVC Belt
– CN40 FS x FS for conveyor lengths 10′ 0″ and less
– 60 FPM constant speed
– MD-6 Floor Supports
– 1/2 HP 230/460/3/60 TE Motor

Model “138CAP”

– 19″ or 25″ OAW
– 4″ Wide 120 PVC Belt
– 3″ Roller Centers
– 60 FPM constant speed
– MD-6 Floor Supports
– Up to 3/4 HP 230/460/3/60 TE Motor

Model “138CLR” – 90° Curve

– 19″ OAW, with galvanized straight rollers
– 25″ OAW, with galvanized tapered rollers
– 60 FPM constant speed
– MD-6 Floor Supports
– 1/2 HP 230/460/3/60 TE Motor

Model “190CAP”

– 15″, 21″ or 27″ width between frames
– 3″ Roller Centers
– Galvanized straight rollers
– 60 FPM constant speed
– MD-6 Floor supports
– Up to 1 HP 230/460/3/60

Model “190CLR” – 90° Curve

– 15″, 21″ or 27″ width between frames
– 60 FPM constant speed
– MD-6 Floor Supports
– 1/2 HP 230/460/3/60 TE Motor

Model “190RB”

– 12″, 18″, 24″, 30″ or 36″ belt width, 120 PVC Belt
– CN40 FS x FS for conveyor lengths 10′ 0″ and less
– 60 FPM constant speed
– MD-6 Floor Supports
– Up to 1 HP 230/460/4/60 TE Motor

Model “190LS”

– 15″, 21″, 27″, 33″ or 39″ width between frames
– 3″ Roller Centers
– 60 FPM constant speed
– MD-6 Floor Supports
– Up to 1 HP 230/460/3/60 TE Motor

Model “190LSC” – 90° Curve

– 15″, 21″, 27″, 33″ or 39″ width between frames
– MD-6 Floor Supports
– Slave driven only

Model “190RBI”

– 18″, 24″, 30″ or 36″ OAW
– Rough-Top Belt
– 60 FPM constant speed
– MD-6 Floor supports
– Galvanized rollers on 6″ centers
– Up to 1 HP 230/460/3/60 TE Motor

Model “FTC”

– 14″, 18″, 24″, 30″ or 36″ belt width
– Rough-Top Belt
– 60 FPM Constant speed
– MD-6 Floor supports
– Up to 1 HP 230/460/3/60 TE Motor

Powered Feeder Section – Chain Driven

– 42″ OAL with 14″ CN40 belt
– 42″ OAL with 18″ CN40 belt
– 75″ OAL with 24″ CN40 belt
– 75″ OAL with 30″ CN40 belt
– 87″ OAL with 36″ CN40 belt
– MD-6 Floor Supports

The accessories listed below will carry the same lead times as the “Zip Ship” conveyor model on which they are to be used.
Adjustable Channel Guard Rails – Power and Gravity, for straight section and curves. Straight sections in 5′ and 10′ lengths only.
Angle Guard Rails – 1-1/2″ x 1-1/2″ x 12 gauge galvanized, and 1-1/2″ x 2″ x 12 gauge galvanized, 5′ and 10′ lengths only.
Floor Supports – LD-4, LD-5, LD-6, MD-4, MD-5, MD-6, HD-4, HD-5, HD-6, HD-7 (Widths match OAW of stocked conveyor).
Knee Braces – KB-24
Tripod Supports – For Skatewheel and 138SR Gravity 12″, 18″ and 24″ OAW.
Model T-*-40 and Model T-*-52.
Optional Power Conveyor Speeds – 45 or 75 FPM constant speeds
Optional Motors – 1/2 thru 1 HP Totally Enclosed, in 115/230/1/60 single phase and 230/460/3/60 three phase.
Drives and Take-ups – Center drives and auxiliary take-ups through 42″ OAW conveyor.
Brakes – Power off brakes for 1/2 through 1 HP motors.
Electrical Controls – Manual motor starters through 1 HP single phase;
20 ft. power cord and plug, single phase only; single direction or reversing magnetic starters with push buttons, through 1 HP three phase.