Model “138CLRSS”

Driving Belt — “B” section V-belt.

Bed — Roller bed width between frames, 10", 13", 16" and 22". 5½" x 1½" x 12 gauge powder painted formed steel channel frame.

Tread Rollers — 1-3/8" diameter x 18 gauge galvanized steel tread rollers, 1½" centers, 5/16" hex shaft for 13"-19" OAW. 2½" to 111⁄16" tapered roller for 25" OAW conveyor, 7/16" hex shaft.

Pressure Sheaves — 3" diameter x 3⁄8" bore, adjustable to give required driving force.

Floor Supports — Adjustable 30" to 44" from floor to top of rollers. One support at each end, center leg on outer rail.

Tangent — 12" long, one on each end.

End Drive — Mounted below bed section.

Bearings — Sealed prelubricated with cast iron housings.

Speed Reducer — C-Face mounted heavy duty worm gear reducer.

Motor — ½ HP 230/460-3-60 TE motor.

Conveying Speed — 60 FPM constant.

Capacity — 300 Ibs. total distributed live load.

Guard Rails — Adjustable channel, continuous channel, steel guard rails available.

Floor Supports — Lower or higher supports are available. Minimum elevation 15½".

Ceiling Hangers — ½" diameter threaded rods 8 feet long with locking nuts and mounting hardware. Other lengths are available.

Side Mounted Drive — End drive mounted to side of conveyor bed section. Minimum elevation 8". Specify side.

Minimum tangent length — 18".

Motor — Single phase, energy efficient, explosion proof, etc. Other HP available.

Conveying Speed — Variable and other constant speeds available.

Electrical Controls — Magnetic starters and push button stations; manual motor starters with overload protection, others.