MODEL “190LSC / 190LSCS / 190LSS”

Bed – Roller bed with 2-1⁄2″ diameter tapered to 1-11⁄16″ diameter x 14 gauge galvanized and 1.9″ diameter x 16 gauge galvanized tread rollers. Mounted in 7″ x 12 gauge powder painted formed steel channel frame.
Floor Supports– Adjustable 31-1⁄2″ to 45-1⁄2″ from floor to top of rollers. One support at ends of 190LSC (Curve), 190LSCS (Curve Spur) and 190LSS (Straight Spur). Single leg supplied for center of outside rail on 90° 190LSC only.
Slave Driven– Curves or spurs are slave driven from drive shaft of Model 190LS conveyor. Shafts are coupled by chain coupling at bed joints.
Drive Shaft– 1″ diameter steel shaft extends full length of conveyor, coupled with universal joints (“U” joints) at necessary intervals.
Drive Spools – 2″ diameter Delrin spool held in place on drive shaft with “snap-on” lock collars.
Drive Guard– Underside of drive shaft with spools and drive belts guarded full length of conveyor.
Drive Belts – 3⁄16″ diameter urethane belt from drive spool to tread roller.
Bearings – Tread rollers, pre-lubricated ball bearings. Sealed, pre-lubricated, self-aligning ball bearings on drive shaft.
Butt Couplings– Standard for connecting to 190LS.
Capacity– See Load Capacity Chart.
(For Optional Equipment, Weight Specifications, and Engineering Line Drawings, please see catalog pages, above).

ACSI Paint Colors

(Optional colors available at extra cost)

Conveying Speed – Other constant and variable speeds from 30 to 120 FPM.

Guard Rails – Adjustable channel, continuous channel,steel guard rails available.

Floor Supports – Lower or higher supports available. Minimum elevation with standard drive mounting is 18″ to top of rollers.

Ceiling Hangers – 1 ⁄2″ diameter x 8’0″ long threaded rods with locking nuts and mounting hardware.